Ruijie RG-CS83 Series Configuration Manual page 304

Web-based Configuration Guide
Alert Type
devices connected to
the device.
The MAC address
table is full of entries.
The ARP table is full of
ARP entries.
The PoE process is
not running.
The total PoE power is
overloaded.
The device has a loop
alarm.
Description
occurs on one or more devices.
The number of L2 MAC address entries is
about to reach the hardware capacity limit of
the product.
The number of ARP entries on the network
exceeds the ARP capacity of the device.
The PoE service of the device fails and no
power can be supplied.
The total PoE power of the device is
overloaded, and the new connected PD
cannot be powered properly.
A network loop occurs on the LAN.
300
Support Description
NA
NA
It is applicable only to NBS Series
Switches that support the PoE
function.
(The device models are marked
with "-P".)
It is applicable only to NBS Series
Switches that support the PoE
function.
(The device models are marked
with "-P".)
NA
Diagnostics