Configuring Static Routes - Ruijie RG-CS83 Series Configuration Manual

Web-based Configuration Guide
7
Configuring Route
7.1

Configuring Static Routes

Choose Local Device > L3 Interfaces > Static Routing.
Static routes are manually configured by the user. When a data packet matches a static route, the packet will
be forwarded according to the specified forwarding mode.
Caution
Static routes cannot automatically adapt to changes of the network topology. When the network topology
changes, you need to reconfigure the static routes.
Click Add. In the dialog box that appears, enter the destination address, subnet mask, outbound interface, and
next-hop IP address to create a static route.
115
Configuring Route