Web-based Configuration Guide
parameter
Server Escape
Re-authentication
Guest VLAN
EAP-Request Packet
Retransmission Count
Quiet Period
Client Packet
Timeout Duration
Client Packet
Timeout Duration
EAP-Request Packet Interval
(2) add server
Before configuration, please confirm :
illustrate
If the server disconnection is detected, all users will be allowed to access
the Internet
Require clients to re-authenticate at certain intervals to ensure network
security
Provide a VLAN for unauthenticated clients to restrict their access
Define the number of times the EAP request message will be
retransmitted when no response is received, value range: 1- 10 times
During the authentication process, the idle time between the client and
the server does not exchange authentication messages, value range: 0-
65535 seconds
The time limit for the server to wait for the response from the client,
exceeding this time will be considered as an authentication failure, value
range: 1-65535 seconds
The time limit for the client to wait for the server to respond, exceeding
this time will be considered as an authentication failure, value range: 1-
65535 seconds
Define the time interval between sending EAP request messages to
control the rate of the authentication process, value range: 1-65535
seconds
261
System Configuration
Need help?
Do you have a question about the RG-CS83 Series and is the answer not in the manual?