Download  Print this page

Setting The Camera; Camera Setting Page; Camera Setting Section - Sony IPELA SNC-RZ30N User Manual

Version 2.
Hide thumbs

Advertisement

Restore setting
Loads the stored setting data of the camera.
Click Browse and select the file in which the setting data
is stored. Then, click Apply, and the camera is adjusted
according to the loaded data and restarted.
Notes
• The IP address setting in the Wired LAN setting
section (see page 23) on the Network setting page and
the IP address setting in the Wireless LAN setting
section (see page 24) cannot be set.
• The preset position names specified on the Preset
position setting page are set, but the camera positions
preset with the Preset position names cannot be set.
(see page 29)
Reboot
Reboots the camera.
Click Reboot, and "The SNC-RZ30 will be rebooted.
Are you sure?" appears. Click OK to reboot the camera.
Factory default
Resets the camera to the factory settings.
Click Factory default, and "All configuration
information will be initialized as factory setting. Are
you sure?" appears. Click OK to reset to the factory
settings.

Setting the Camera

— Camera setting Page

When you click Camera on the Administrator menu,
the Camera setting page appears.
Use this page to set the functions of the camera.
Note
To update the camera for the changed setting, click
Apply on the changed item.

Camera setting Section

Image size
Select the size of the image to be transmitted to the
computer.
You can select from among the following options.
SNC-RZ30N:
736 × 480 (Auto), 736 × 480 (Frame), 736 × 480
(Field), 640 × 480 (Auto), 640 × 480 (Frame), 640 ×
480 (Field), 320 × 240, 160 × 120
SNC-RZ30P:
736 × 544 (Auto), 736 × 544 (Frame), 736 × 544
(Field), 640 × 480 (Auto), 640 × 480 (Frame), 640 ×
480 (Field), 320 × 240, 160 × 120
Setting the Camera — Camera setting Page
19

Advertisement

Table of Contents

   Also See for Sony IPELA SNC-RZ30N

   Related Manuals for Sony IPELA SNC-RZ30N

Comments to this Manuals

Symbols: 0
Latest comments: