Table of Contents
Advertisement
Setting the Camera
Outputs
You can specify video signals directly output from the camera
with menu operations.
Notes
• The MAIN (camera picture), RET (return signal), or VF (the
same picture as that displayed on the viewfinder) setting is
common to SD-SDI and VBS. Different signals cannot be
output.
• When <CAM MODE> is set to 4K/HDR MODE, DOWN
CONVERTER is not available.
Only the CHARACTER information is displayed when
<CAM MODE> is set to 4K/HDR MODE and SD-SDI or VBS
is selected.
The menu pages used for the output settings have been
registered to the USER menu at the factory.
• <OUTPUT FORMAT>
• <TEST OUT>
• <SDI OUT>
Set the following menu items to the settings shown in the
table.
For details on menu operations and the USER menu, see
"Menu Operations" on page 21.
Outputting the signal being shot by the
camera
The same textual information as those displayed on the
viewfinder can be added to the output signal by setting
CHARACTER to "ON" on the <SDI OUT> or <TEST OUT>
page.
To output as HD-SDI
Menu page
Item
<SDI OUT>
SDI-MONI OUT
To output as SD-SDI
Menu page
Item
<SDI OUT>
SDI-MONI OUT
DOWN CONVERTER
SELECT
To output as VBS
Menu page
Item
<TEST OUT>
OUTPUT
DOWN CONVERTER
SELECT
Constantly outputting a return signal
• When a camera control unit is connected, one of the signals
being supplied to the camera control unit can be selected
and output it from the camera.
• The last selected return signal is output.
• The same textual information as those displayed on the
viewfinder can be added to the output signal by setting
CHARACTER to "ON" on the <SDI OUT> or <TEST OUT>
page.
To output as HD-SDI
Menu page
<SDI OUT>
To output as SD-SDI
Menu page
<SDI OUT>
To output as VBS
Menu page
<TEST OUT>
Outputting the same image as that on the
viewfinder
• With HD-SDI, you can obtain a signal that includes the same
information as that being displayed on the viewfinder
according to the settings of the VF MARKER,
CHARACTER, VF DETAIL, ZEBRA, etc. The ON/OFF or
other settings for adding information are common to those
for the viewfinder. The output is synchronized with switching
among Y, R, G, and B or switching to a return signal.
• With SD-SDI or VBS, the output is synchronized only with
switching between a return signal and the camera image.
Switching between Y, R, G, and B is not supported.
Setting
Information other than CHARACTER (such as VF
MARKER, VF DETAIL, ZEBRA) cannot be added to the
MAIN
output.
Note
Setting
With the settings for outputting the same image as that on the
SD-SDI
viewfinder, the output will be obtained in 1080i, even if the
format setting is 720P.
MAIN
To output as HD-SDI
Menu page
Setting
<SDI OUT>
VBS
To output as SD-SDI
MAIN
Menu page
<SDI OUT>
19
Item
Setting
SDI-MONI OUT
RET
Item
Setting
SDI-MONI OUT
SD-SDI
DOWN CONVERTER
RET
SELECT
Item
Setting
OUTPUT
VBS
DOWN CONVERTER
RET
SELECT
Item
Setting
SDI-MONI OUT
VF
Item
Setting
SDI-MONI OUT
SD-SDI
DOWN CONVERTER
VF
SELECT
Advertisement
Table of Contents
