Setting The Camera Outputs - Sony HDC1700 Operation Manual

6
Rotate the MENU SEL knob/ENTER button to align the
arrow marker ( ) to the item to be set and push on
,
the MENU SEL knob/ENTER button.
To use the VF dynamic contrast signal
Set DYNAMIC CONTRAST to ON to add the contrast
signal in the image. You can adjust the GAIN in the range
of 0 to 100%.
You can adjust the characteristics of the contrast signal
with the menu items below.
FILTER: Adjust the selection range of the contrast
extraction target pixel.
MODE: Selection of contrast signal addition mode.
HIGHLIGHT emphasizes the contrast of the high
brightness range. FOGGY emphasizes the contrast
of the image which is hazy and in low contrast.
7
Rotate the MENU SEL knob/ENTER button to display
the desired setting and push on the MENU SEL knob/
ENTER button.
8
To finish the adjustment, set the DISPLAY switch to
OFF to exit Menu mode.
Setting the Camera
Outputs
You can specify video signals directly output from the camera,
with menu operations.
Notes
• The MAIN (camera picture), RET (return video), or VF (the
same picture as that displayed on the viewfinder screen)
setting is common to SD-SDI and VBS. Different signals
cannot be output.
• When <CAM MODE> is set to 4K/HDR MODE, DOWN
CONVERTER is not available.
Only the CHARACTER information is displayed when
<CAM MODE> is set to 4K/HDR MODE and SD-SDI or VBS
is selected.
The menu pages used for the output settings have been
registered to the USER menu at the factory.
• <OUTPUT FORMAT>
• <TEST OUT>
• <SDI OUT>
Set the following menu items to the settings shown in the
table.
For details on menu operations and the USER menu, see
"Menu Operations" on page 26.
Outputting the signal being shot (camera
picture)
The same textual information as that displayed on the
viewfinder screen can be added to the output signal by setting
CHARACTER to "ON" on the <SDI OUT> or <TEST OUT>
page.
To output as HD-SDI
Menu page
<SDI OUT>
To output as SD-SDI
Menu page
<SDI OUT>
To output as VBS
Menu page
<TEST OUT>
23
Item Setting
SDI-MONI OUT MAIN
Item Setting
SDI-MONI OUT SD-SDI
DOWN CONVERTER MAIN
SELECT
Item Setting
OUTPUT VBS
DOWN CONVERTER MAIN
SELECT