Setting the Camera
Outputs
You can specify the video signals directly output from the
camera on the <SDI OUT> page of the menu.
The <SDI OUT> page of the menu has been registered in the
USER menu at the factory.
Set the <SDI OUT> page as shown in the following tables.
For details about menu operations and the USER menu, see
“Menu Operations” (page 20).
Outputting an SDR signal that is output from a
camera control unit
The same textual information as that displayed on the
viewfinder screen can be added to the output signal by setting
CHARACTER to “ON” on the <SDI OUT> page.
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
MAIN
Constantly outputting a return video
• When a camera control unit is connected, one of the signals
being supplied to the camera control unit can be output from
the camera.
• The last selected return signal is output.
• The same textual information as that displayed on the
viewfinder screen can be added to the output signal by
setting CHARACTER to “ON” on the <SDI OUT> page.
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
RET
Outputting the same image as that on the
viewfinder screen
You can obtain a signal that includes the same information as
that being displayed on the viewfinder screen according to the
settings of the VF MARKER, CHARACTER, VF DETAIL,
ZEBRA, etc. The ON/OFF or other settings for adding
information are common to those for the viewfinder. The
output is synchronized with switching among Y, R, G, and B or
switching to a return signal.
PAINT menu functions (excluding WHITE and FLARE) and
the WHITE SHADING function are not applied to the
viewfinder image.
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
VF
Outputting an SDR signal that is output from a
camera control unit in 3G-SDI
The SDI-1 output becomes 3G-SDI output.
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-1 OUT
3G-SDI
Page 17