Camera Control Mode Setting - Sony CH140 Application Manual

Application Guide

4.2.4. Camera Control Mode Setting

PTZ
CGI
camera.cgi
CGI Syntax:
http://ip_adr/command/camera.cgi?PtzfMode=value
http://ip_adr/command/camera.cgi?RelPanTilt=value
http://ip_adr/command/camera.cgi?RelZoom=value
Sony Network Camera
ZP550 ZR550
Parameter Value
normal
PtzfMode
step
RelPanTilt
1 to 10
RelZoom
1 to 10
16
Pan/Tilt/Zoom/Focus
Description
This command is available with the ActiveX viewer.
Determines the mode used when operating the
8-direction arrow buttons or the TELE/WIDE button
on the ActiveX viewer.
When you click the mouse button, the camera
starts panning, tilting or zooming operation, and the
operation continues while you hold down the mouse
button. To stop the operation, release the mouse button.
This command is available with the ActiveX viewer.
Determines the mode used when operating the
8-direction arrow buttons or the TELE/WIDE button
on the ActiveX viewer.
Each time you click the mouse button, the camera
moves (panning, tilting or zooming). If you keep the
mouse button held down for more than 1 second, the
operation mode is temporarily changed to Normal.
When you release the mouse button, the camera
operation stops and the Step mode is restored.
When you select "step" for "PtzfMode" parameter,
"RelPanTilt" becomes enabled.
Sets the camera transition level from 1 to 10 when you
click the 8-direction arrow button for panning/tilting.
Selecting 10 provides the maximum transition level.
When you select "step" for "PtzfMode" parameter,
"RelZoom" becomes enabled.
Sets the camera transition level from 1 to 10 when you
click or the TELE/WIDE button for zooming.
Selecting 10 provides the maximum transition level.
June, 2013 / V3.1