Configuring The Network; Network Setting Page; Wired Lan Setting Section - Sony IPELA SNC-RZ30N User Manual

Version 2
Hide thumbs Also See for IPELA SNC-RZ30N:
Table of Contents

Advertisement

Pan/Tilt: Select the camera transition level from 1 to 10
by clicking the 8-direction arrow button for panning/
tilting (see page 10). Selecting 10 gives the
maximum transition level.
Zoom: Select the camera transition level from 1 to 10
by clicking the TELE or WIDE button for zooming
(see page 11). Selecting 10 gives the maximum
transition level.
Focus: Select the focus adjustment transition level from
1 to 10 by clicking the FAR or NEAR button for
manual focusing (see page 12). Selecting 10 gives
the maximum transition level.
Note
When you have changed the Mode or Level setting, click
the Control button on the menu section to update the
setting on the image control section.

Configuring the Network

— Network setting Page

When you click Network on the Administrator menu,
the Network setting page appears.
Use this page to configure the network to connect the
camera and the computer.

Wired LAN setting Section

This section provides the menus for connecting the
camera through the Ethernet.
DHCP
Select On to assign the IP address to the camera
automatically. When you have assigned a proper IP
address to the camera, select Off.
Note
When you set DHCP to On, make sure that there is an
DHCP server on the network.
DNS auto acquisition
When DHCP is set to On, select if the IP address of the
DNS server is assigned automatically or not. Select On
to assign the IP address of the DNS server automatically.
IP address
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Default gateway
Type the default gateway.
MAC address
Displays the MAC address of the camera.
Configuring the Network — Network setting Page
23

Advertisement

Table of Contents
loading

Table of Contents