Alarm Mode Setting Section - Sony IPELA SNC-RZ30N User Manual

Version 2
Hide thumbs Also See for IPELA SNC-RZ30N:
Table of Contents

Advertisement

User name
Type the user name for the FTP server.
Password
Type the password for the FTP server.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
Remote path
Type the path to the destination up to 64 characters.
Image file name
Type the basic file name you want to assign to the
images when sending to the FTP server. You can use up
to 6 alphanumeric, - (hyphen) and _ (underscore) for
naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be sent to the FTP server.
Date/Time: The date/time suffix is added to the file
name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits) and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number is added to
the basic file name. A number of up to 10 digits
between 0000000000 and 4294967295 is added to
the file name.
Tip
When the Mode menu is set to Alarm, the type of alarm
and the capture timing to the alarm are added to the
suffix.
Type of alarm: S1 (Sensor 1), S2 (Sensor 2), S3 (Sensor
3), AD (Activity Detection)
Capture timing: PR (Pre-alarm), JT (Just alarm), PT
(Post-alarm)
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
Mode
Select the mode of the FTP client function.
Manual: Sends still images to the FTP server manually.
After selecting Manual, click OK. The FTP client
function mode is set to Manual.
32
Sending Images to FTP Server — FTP client setting Page
In this mode, when you click the
button on the main viewer page, a still image is
captured and sent to the FTP server. (See
"Controlling the Application Manually" on page 13.)
Alarm: Sends still images to the FTP server by
synchronizing with an external sensor input or the
built-in activity detection function. When you select
Alarm, the Alarm mode setting section appears (see
page 32).
Note
If the Suffix menu is set to None, you cannot select
the Alarm mode. When you want to use the Alarm
mode, set the Suffix menu to Date/Time or
Sequence number.
Periodical sending: Sends still images to the FTP
server periodically. When you select Periodical
sending, the Periodical sending mode setting section
appears (see page 33).
Back/OK
See "Buttons common to every setting page" on page
16.

Alarm mode setting Section

Alarm
Select the alarm to link the FTP client function. If the
selected alarm is detected, the still images before and
after the alarm are captured sequentially and sent to the
FTP server.
Sensor 1: External sensor connected to sensor input 1 of
the camera I/O port
Sensor 2: External sensor connected to sensor input 2 of
the camera I/O port
Sensor 3: External sensor connected to sensor input 3 of
the camera I/O port
Activity detection: The activity detection function built
in the camera
To set the activity detection function, click Activity
detection. The Activity detection setting page
appears (see page 44).
(Trigger)

Advertisement

Table of Contents
loading

Table of Contents