Recording Images in
— Image memory setting Page
When you click Image memory on the Administrator
menu, the Image memory setting page appears.
Use this page to set up for the image memory function
which captures a still image and records it in the built-in
memory of the camera (about 8 MB) or the ATA
memory card. You can capture a still image at the
moment when a trigger occurs by an external sensor
input, the built-in activity detection function or a manual
trigger button. The captured still image is recorded in
the built-in memory or the ATA memory card. You can
also record a still image periodically.
The recorded image file can be found or downloaded to
the computer using the FTP server function. (See
"Downloading Images from the Camera — FTP server
setting Page" on page 34.)
For the verified cards, contact your authorized Sony
Activating/Deactivating the Image
Memory Function — Image memory
usage setting Page
Displays the free space of the built-in memory of the
Displays the type of the PC card inserted into the PC
card slot and its free card space. The PC card slot located
on the lens side is "A-slot," and that on the camera
bottom side is "B-slot."
Use image memory function/Do not use
image memory function
To activate the Image memory function, select Use
image memory function and click OK. The Image
memory setting page appears.
When you do not use the Image memory function, select
Do not use image memory function and click OK.
Select the memory you want to store the image to, from
the drop-down list.
Built-in memory: Built-in memory of the camera
(about 8 MB)
ATA memory card (A-slot): ATA memory card
inserted into A slot of the camera
ATA memory card (B-slot): ATA memory card
inserted into B slot of the camera
• The image recorded in the built-in memory will be
erased when the power of the camera is turned off.
• The frame rate and operability on the main viewer
page may decrease during image storage.
• Deactivate the image memory function before
removing the ATA memory card or turning off the
power of the camera with the ATA memory card
• When you remove or insert a card, wait at least 10
Recording an Image in the Selected
Memory — Image memory setting
Image file name
Type the basic file name you want to assign to the
images when saving in the memory. You can use up to
6 alphanumeric, - (hyphen) and _ (underscore) for
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be recorded in memory.
Date/Time: The date/time suffix is added to the file
The date/timer suffix consists of lower two-digits of
Recording Images in Memory — Image memory setting Page