Configuring Windows Firewall
The IP Setup Program may not operate correctly
depending on the configuration of Windows Firewall.
(No cameras are shown in the list even if they are
detected.) In this case, confirm the Windows Firewall
configuration as follows:
Select Control Panel from the Start menu of
Click Windows Firewall.
Select Turn Windows Firewall on or off.
"User Account Control – Windows needs your
permission to continue" may appear. In this case,
Select Off in the "General" tab.
The cameras will be displayed in the list.
If you want to keep Windows Firewall On, continue
with the following steps.
Select the "Exceptions" tab.
Select Add Program....
If the Add Program dialog appears, select IP Setup
Program and click OK.
Then the IP Setup Program is added to the Program
or port list.
When the above procedure is completed, the
cameras connected in the local network are
displayed in the IP Setup Program.