Alarm Mode Setting Section - Sony IPELA SNC-RZ30N User Manual

SMTP server name
Type the SMTP server name up to 64 characters, or the
IP address of the SMTP server.
Recipient e-mail address
Type the recipient E-mail address up to 64 characters.
You can specify up to three recipient E-mail addresses.
Administrator e-mail address
Type the Administrator e-mail address up to 64
characters.
This address is used for reply mail and sending error
messages from the camera.
Subject
Type the subject/title of the E-mail up to 64 characters.
Message
Type the text of the E-mail up to 384 characters. (A line
break is equivalent to 2 characters.)
Image file name
Type the basic file name you want to assign to the image
to attach an E-mail. You can use up to 6 alphanumeric,
- (hyphen) and _ (underscore) for naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be sent via an E-mail.
Date/Time: The date/time suffix is added to the file
name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits) and second (2 digits) ,
thus 12-digit number is added to the file name.
Sequence number: A consecutive number is added to
the basic file name. A number of up to 10 digits
between 0000000000 and 4294967295 is added to
the file name.
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
Mode
Select the mode of the SMTP function.
Manual: Sends a still image attached to an E-mail
manually. After selecting Manual, click OK. The
SMTP function mode is set to Manual.
In this mode, when you click the
button on the main viewer page, a still image is
36
Sending an Image via E-mail — SMTP setting Page
captured and sent via an E-mail. (See "Controlling
the Application Manually" on page 13.)
Alarm: Sends a still image via an E-mail by
synchronizing with an external sensor input or the
built-in activity detection function. When you select
Alarm, the Alarm mode setting section appears (see
page 36).
Periodical sending: Sends a still image via an E-mail
periodically. When you select Periodical sending,
the Periodical sending mode setting section appears
(see page 37).
Back/OK
See "Buttons common to every setting page" on page
16.

Alarm mode setting Section

Alarm
Select the alarm to link the SMTP function. If the
selected alarm is detected, a still image is captured and
sent via an E-mail.
Sensor 1: External sensor connected to sensor input 1 of
the camera I/O port
Sensor 2: External sensor connected to sensor input 2 of
the camera I/O port
Sensor 3: External sensor connected to sensor input 3 of
the camera I/O port
Activity detection: The activity detection function built
in the camera.
To set the activity detection function, click Activity
detection. The Activity detection setting page appears
(see page 44).
Note
The image that can be attached to an E-mail is the one
captured at the moment when an alarm is input. If the
next alarm occurs while the captured image is being
processed, that alarm is ignored.
Available period
Select the period for which the alarm mode is available.
Always: The alarm mode is available any time.
(Trigger)