Advantech Automation1 iXC4 Hardware Manual page 15

Hardware Manual
Figure 2: Installation Connection Overview for the XC4
Connect the motor to the amplifier Motor Output connector.
1
Connect the motor to the amplifier Feedback connector.
Connect a PC or drive-based controller HyperWire port to the HyperWire In
2
port.
Connect additional I/O as required by your application
3
(if you purchased the I/O option).
4 Connect the Safe Torque Off (STO).
5 Connect the power supply to the Control Supply connector.
6 Connect the motor power to the Motor Supply connector.
www.aerotech.com
iXC4/XC4
Section 2.2.
Section 2.3.
Section 2.7.
Section 2.5./
Chapter 3
Section 2.4.
Section 2.1.1.
Section 2.1.2.
15