Table of Contents
Advertisement
iXC4/XC4
Installation Overview
The images that follow show the order in which to make connections and settings that are typical to
the iXC4/XC4. If a custom interconnect drawing was supplied with your system, that drawing is on
your Storage Device and shows as a line item on your Sales Order in the Integration section.
Figure 1:
Installation Connection Overview for the iXC4
Connect the motor to the amplifier Motor Output connector.
1
Connect the motor to the amplifier Feedback connector.
2
Connect the PC to the USB or Ethernet port.
3
Connect the next drive in the system to the HyperWire Out port.
Connect additional I/O as required by your application
4
(if you purchased the I/O option).
5
Connect the Safe Torque Off (STO).
6
Connect the power supply to the Control Supply connector.
7
Connect the motor power to the Motor Supply connector.
14
Hardware Manual
Section 2.2.
Section 2.3.
N/A
Section 2.7.
Section
2.5./
Chapter 3
Section 2.4.
Section 2.1.1.
Section 2.1.2.
www.aerotech.com
Advertisement
Table of Contents
