PeakTech 1245 Operation Manual page 137

The description of the Save Function Menu is shown as the following table:
Function Menu
Type
When the type is Wave, the menu shows as following:
Source
Object & Show
Save
Storage
When the type is Setting, the menu shows as following:
Setting
Save
Load
When the type is Image, the menu shows as following:
Save
Setting
Wave
Setting
Image
Record
CH1
CH2
Math
Object 1~15
ON
Show
OFF
Internal
External
Setting1
.....
Setting8
Description
Choose the saving type (the Record Type see
"27.1. How to Record/Playback Waveforms" on
page 134).
Choose the waveform to be saved.
Choose the address which the waveform is saved
to or recall from.
Recall or close the waveform stored in the current
object address. When the show is ON, if the
current object address has been used, the stored
waveform will be shown, the address number and
relevant information will be displayed at the top
left of the screen; if the address is empty, "None is
saved" will be displayed.
Save the waveform of the source to the selected
address. You can also press Copy button to do it.
Storage format is BIN.
Save to internal storage or USB storage. When
External is selected, save the waveform according
to the current record length (see "Record Length
Menu" on page 126). The file name is editable.
The waveform file could be open by PeakTech
waveform analysis software (on the supplied CD).
The setting address
Save the current oscilloscope setting to the
internal storage
Recall the setting from the selected address
Save the current display screen. The file is stored
in BMP format and the file name is editable. The
file can be only stored in a USB storage, so a USB
storage must be connected first. The file is stored
in BMP format and the file name is editable.
-136-
®