1. Safety Precautions This product complies with the requirements of the following European Community Directives: 89/336/EC (Electromagnetic Compatibility) and 73/23/EC (Low Voltage) as amended by 93/68/EC (CE-Marking). Overvoltage category III 1000V; pollution degree 2. CAT I: For signal level, telecommunication, electronic with small transient over voltage CAT II: For local level, appliances, main wall outlets, portable equipment CAT III:...
Page 3
* Check test leads and probes for faulty insulation or bare wires before connection to the equipment. * To avoid electric shock, do not operate this product in wet or damp conditions. Conduct measuring works only in dry clothing and rubber shoes, i. e. on isolating mats. * Never touch the tips of the test leads or probe.
Page 6
General Characteristics of the PeakTech 1200 Colour Digital Storage Oscilloscope With the bandwidth of 25M; Record length of 6,000 points for each channel; Sampling rates of 250MS/s for each channel; Reading-out with the cursor; Five automatic measurement functions; Color liquid crystal display of high resolution and high contrast with adjustable back light;...
Page 7
Fig. 1 The Front Panel Fig. 1 The Front Panel Function Buttons Function Buttons - 2 - Adjustment Adjustment Horizontal Horizontal Trigger Trigger Back-light Back-light Vertical Control Vertical Control Connector Connector Menu Selection Menu Selection Control Control Control Control Fig. 2 Explanatory Drawing for Operations - 6 -...
Page 47
Save and Recall the Wave Form ® The PeakTech oscilloscope can store four wave forms, which can be displayed with the current wave form at the same time. The stored wave form called out can not be adjusted. In order to save the wave form of the channel CH1 into the address A, the operation steps should be followed: 1.
Appendix A: Technical Specifications Unless otherwise specified, the technical specifications applied are applicable to the probe with the attenuation switch setting 10X . Only if the oscilloscope fulfill the f llowing two conditions at first, can these specification standards be reached. „...
Appendix B: Enclosure Standard Accessories: • Passive probe: 2, 1.2 m, 1:1 (10:1) • CD: 1, for operation instruction. • USB data line • Power line: one, up to the standards of the country in which it is used. • User's Manual: One Options: •...