Genie Z-25/8 Service Manual page 20

Section 3 • Scheduled Maintenance Inspections
Maintenance Tables
Table A
A-1 Inspect the Operator's and Safety Manuals
A-2 Inspect the Decals and Placards
A-3 Inspect for Damage and Loose or Missing Parts
A-4 Check the Hydraulic Oil Level
A-5 Check for Hydraulic Leaks
A-6 Test the Platform and Ground Controls
A-7 Test the Auxiliary Power Operation
A-8 Test the Tilt Sensor
A-9 Test the Drive Speed Limit Switch
A-10 Perform 30 Day Service
Table B
B-1 Check the Batteries
B-2 Inspect the Electrical Wiring
B-3 Inspect the Tires and Wheels
(including castle nut torque)
B-4 Test the Key Switch
B-5 Test the Emergency Stop Buttons
B-6 Test the Ground Control Override
3 - 2 Genie Z-20/8N & Genie Z-20/8 & Genie Z-25/8
Tools are New parts
required required
First Edition • Third Printing
Dealer
service
suggested
Part No. 41314