Genie Z-25/8 Service Manual page 2

Introduction
Important
Read, understand and obey the safety rules and
operating instructions in the Genie Z-25/8 & Genie
Z-20/8 & Genie Z-20/8N Operator's Manual before
attempting any maintenance or repair procedure.
This manual provides detailed scheduled
maintenance information for the machine owner
and user. It also provides troubleshooting and
repair procedures for qualified service
professionals.
Basic mechanical, hydraulic and electrical
skills are required to perform most procedures.
However, several procedures require specialized
skills, tools, lifting equipment and a suitable
workshop. In these instances, we strongly
recommend that maintenance and repair be
performed at an authorized Genie dealer
service center.
Genie Industries has endeavored to deliver the
highest degree of accuracy possible. However,
continuous improvement of our products is a
Genie policy. Therefore product specifications
are subject to change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and other manuals. Please
write to the technical publications team in care of
Genie Industries, PO Box 97030, Redmond WA
98073-9730 USA.
If you have any questions, please call Genie
Industries.
ii
Genie Z-20/8N & Genie Z-20/8 & Genie Z-25/8
Contact us:
http://www.genielift.com
e-mail: techpub@genieind.com
Copyright © 1997 by Genie Industries
First Edition:
Genie and "Z" are registered trademarks of
Genie Industries in the USA and many other
countries.
Printed on recycled paper
Printed in U.S.A.
First Editon • Third Printing
®
First Printing, September 1997
Second Printing, February 1998
Third Printing, April 2000
Part No. 41314