Table of Contents
Advertisement
5. Up to a maximum of 120,000 Telephone Numbers may be assigned in the entire Enhanced CCIS/EX-
FCCS network (including Telephone Numbers in the NEAX2000 IVS
per FUG (not to exceed 120,000 per total network).
3.2 Centralized-MAT for EX-FCCS
[Centralized Maintenance]
(a) NEAX2000 IVS
1. MAT software for NEAX2400 IMX system and NEAX2000 IVS
the "MAT." Depending on the system logged into determines the MAT software used.
2. To log in the NEAX2000 IVS
3. See the manual describing NEAX2000 IVS
4. The data transmission speed between NEAX2000 IVS
64Kbps since the CCH card is used.
(b) NEAX2400 IMX
1. All systems in the EX-FCCS network can be maintained by one MAT.
2. To log in to the NEAX2400 IMX system, assign FUG no. to designate the desired Fusion Network
Group (FUG) and FPC to designate the desired node in the FUG.
3. The user ID and password written in the NDM of each FUG is checked when logging into the
NEAX2400 IMX. This data is programmed using the AUIDN command.
4. When any of the conditions below are met, the MAT is logged into the node designated by the FPC,
but within the FUG where the MAT is installed regardless of entered FUG no. data.
•
No data is assigned to SELF_ FUG (Fusion Group number in the self-FUG) in AFUGN command.
•
FUG requested by the MAT is 0
•
FUG requested by the MAT is the FUG number of self-FUG
5. The existing system (not NEAX2400 IMX) can not be maintained via the Centralized-MAT for EX-
FCCS.
6. Time required for transmitting the 1Mbyte data (1 block of DM) is 2 hours at 64Kbps data speed/1
hour at 128Kbps data speed/15 minutes at 512Kbps data speed.
The number of MAT to be installed may vary depending on the customer specification (one or two MAT can
Note:
be used to centralize the MAT operation or three or more MATs can be used to separate the MAT
operation).
2
2
system, Point Code of the system is designated.
2
ND-70185 (E)
Get other manuals https://www.bkmanuals.com
2
system are installed on a PC called
for the method of checking the log-in user.
2
and NEAX2400 IMX may be a maximum of
EX- FCCS
EX-FCCS Features
2
) and a maximum of 48,000
CHAPTER 8
Page 177
Revision 3.0
Advertisement
Table of Contents
