Figure 3-15 Centralized Management Report-Fusion (Example 2) - NEC NEAX 2400 IMX Manual

Example: 2 When both FCCS and CCIS links are established between two nodes
PC=10
Node A

Figure 3-15 Centralized Management Report-Fusion (Example 2)

Node A/B/C:Refer to Example 1 on the previous page.
Node D: When Point Code of Node C (12) is assigned to ASYD, SYS 1, Indexes 184 and 185, System mes-
sages are sent to Node C using CCIS. When this system data is not assigned (0) and Fusion Point
Code of Node C (3) is assigned to ASYDL, SYS 1, Index 532, system messages are sent to Node C
using FCCS.
Node B
FCCS
PC=11
FPC=2
FCCS
CCIS
FPC=4
Node D
ND-70185 (E)
Get other manuals https://www.bkmanuals.com
SYSTEM CONFIGURATION
Node C
13-H
1. xxxx xxxx 0010 1222
4. x0010 1110 10110 1FFF
PC=12
7. E23C CAAB12 000 0000
FPC=3
NEC
Centralized MAT
CCIS
Center Node: Node C
System Considerations
Fusion
CHAPTER 3
Page 23
Revision 3.0