Table of Contents
Advertisement
Chapter 1 Safety Specification
1.1 Introduction
This chapter mainly introduces the safety principles and standards that should be observed in the use of the
robot or robot system. Users should carefully read and strictly abide by the content related to safety in this
manual. Operators should fully recognize the complexity and danger of the robot system, and pay special
attention to the content related to warning signs.
1.2 Warning Symbols
The danger level in this manual is described with the following warning symbols. Contents related to safety
should be strictly observed.
1.3 Safety Precautions
This section focuses on the protection for operators and the relevant precautions of the first installation. Users
need to read the security warnings in this manual carefully. There are many possibilities, and it is impossible to
cover all of them, but we have described as many situations as possible herein.
1. All JAKA hardware and software must be installed/configured in strict accordance
with the instructions and cautions provided in this manual.
2. The installation of the power cut-off switch should be positioned within the height
range of 0.6 meters to 1.9 meters to facilitate prompt and convenient power
disconnection in the event of an emergency.
3. Prior to the initial use of any JAKA products, a comprehensive inspection of all
electrical components and safety protection systems must be conducted to verify their
integrity and absence of prior damage.
4. Operators possessing the necessary qualifications for robot operation are
instructed to perform a thorough assessment of all safety functions and ensure the
accuracy of parameters and programs before initiating the power supply to the robot.
File Version: 3.2
DANGER:
This sign indicates a potentially dangerous power consumption situation which, if not
avoided, may result in injuries to personnel or serious damage to equipment.
DANGER:
This sign indicates a potentially dangerous situation which, if not avoided, may result
in injuries to personnel or serious damage to equipment.
WARNING:
This sign indicates a potentially dangerous hot surface that may result in injuries to
personnel if touched.
6 / 62
JAKA C Series Hardware User Manual
Advertisement
Table of Contents
