Power Adaptation - JAKA C Series Hardware User Manual

Control cabinet bottom interface use instructions:
1. Ethernet interface: Gigabit network port, configured for dynamic IP usage.
2. Robot connection cable interface: Connection interface between the robot arm and control cabinet.
3. Power cable interface: Connection interface to external AC power outlet.
4. Control stick cable interface: Connection interface to control stick.
5. Rocker switch: Power supply control switch.
6. Cable routing passthrough slot: Dedicated channel to guide external device cables.
7. Cable fixing ring: Used to secure cables in place.

Power Adaptation

5.4.1
Different countries and regions have different standards, and JAKA will provide corresponding plugs when
exported overseas. The specific standards are as follows:
1. China Standard Plug (National Standard): 3 I-shaped flat-pin plug
Cable Core size
Standard (mm²)
RW ×
3 1.0
2. European Standard Plug (European Standard, German Standard): F/E universal plug
Cable Core size
Standard (mm²)
H05W-F 3 1.0
×
3. British Standard Plug (British Standard): G-shaped plug
Cable Core size
Standard (mm²)
File Version: 3.2
Figure 5-16 Bottom panel of the control cabinet
Length Cable OD
(mm) (mm)
3000±50
Length Cable OD
(mm) (mm)
3000±50
Length Cable OD
(mm) (mm)
Rated
Frequency
value
10A 250V 50Hz
Rated
Frequency
value
10A 250V 50Hz
Rated
Frequency
value
45 / 62
Cable LN insulation
Material
2kV 1min
PVC
Cable LN insulation
Material
2kV 1min
PVC
Cable LN insulation
Material
JAKA C Series Hardware User Manual
level
50Hz
level
50Hz
level