Table of Contents
Advertisement
Chapter 4 Mechanical Specification
The robot is mainly composed of six joints and two aluminum arms. The base is used to connect the robot to
the pedestal, and the tool end is used to connect the robot to the end-effector. The end-effector can move and
rotate in the workspace of the robot. This chapter will introduce the basic precautions during the installation of
each component of the robot system.
4.1 Robot Workspace
Size of the Robot
4.1.1
During the installation, you must consider the movement range of the robot to avoid harming the surrounding
personnel and equipment.
C 5
C 7
C 12
Size of the Control Cabinet
4.1.2
File Version: 3.2
22 / 62
JAKA C Series Hardware User Manual
Advertisement
Table of Contents
