Sharing The Drive Menu - WEG ADL300 User Manual

4. SHARING THE DRIVE MENU

The Bus architecture allows direct communication among all devices that are connected to it. The Drive implements the
Menu Sharing function, which displays the drive menu on the Lift Controller. Therefore, the drive can also be configured
from the Lift Controller and, in general, from any device on the bus that supports reception of information via AO 6404
hex
(Modes of Operation Display) / RPDO 260.
Figure 4: Optional and standard display (Left) and Lift Controller display (Right)
In Figure 4, the drive menu is shown on the optional Drive keypad and on the Lift Controller display. At the
communication level, see the figure below.
ADL300 CiA® 417- Description of functions and parameter list Page 8 of 46