Commissioning From Alphanumeric Keypad - WEG ADL300 User Manual

12.

COMMISSIONING FROM ALPHANUMERIC KEYPAD

Commissioning from the keypad is also possible with the CiA 417 application.
12.1 Asynchronous motor: guided startup
From ADL300 Quick Start Guide (pages 48/80 for asynchronous, pages 55/80 for brushless)
GUIDED STARTUP is a procedure for quick commissioning of the Drive that helps you set the main parameters.
It consists of a series of questions corresponding to the various sequences for insertion and calculation of the
parameters required for correct operation of the Drive and the Lift application. These sequences are in the following
order:
● Electrical connections
● Setting motor data
● Self-learning with motor stopped or coupled to load
● Setting encoder parameters
● Setting maximum speed reference value and maximum system speed
● Setting system weight
● Setting application parameters
● Saving parameters
12.2 Synchronous motor: guided startup
● Electrical connections
● Setting motor data
● Self-learning with motor stopped or coupled to load
● Setting encoder parameters
● Encoder phasing
● Setting maximum speed reference value and maximum system speed
● Setting system weight
● Setting application parameters
● Saving parameters
ADL300 CiA® 417- Description of functions and parameter list
See step 1
(QS guide)
See step 2
(QS guide)
See step 3
(QS guide)
See step 4
(QS guide)
See step 6
(QS guide)
See step 7
(QS guide)
See step 8
See step 9
See step 1
(QS guide)
See step 2
(QS guide)
See step 3
(QS guide)
See step 4
(QS guide)
See step 5
(QS guide)
See step 6
(QS guide)
See step 7
(QS guide)
See step 8
See step 9
Page 19 of 46