WEG ADL300 User Manual page 2

Table of Contents

Advertisement

Information about this manual
This manual explains the functions and the description of the parameters.
The information about mechanical installation, electrical connection and fast start-up can be found on the ADL300 Quick
start guide.
The whole set of manuals, included the expansions and field bus manuals, can be found on DOWNLOAD CENTER of
ADL300 on WEG web site:
https://www.weg.net/catalog/weg/IT/en/p/MKT_WDC_GLOBAL_PRODUCT_INVERTER_FOR_ELEVATOR_ADL300
Software version
This manual is updated to software version V 4.x.7
Variation of the number replacing "X" have no influence on the functionality of the device.
The identification number of the drive software version is shown on the drive data plate or can be checked with the
parameter Ver rel firmware- PAR 490, menu 2.6.
Application version (visible only in Expert mode)
This manual is updated according the application version
DS417 V 2.x.0
The identification number of the application version can be checked with the parameter Application ver.rel - PAR 504,
menu 2.9, and the type of application can be checked with the parameter Application type - PAR 506, menu 2.10 (21 =
Application CiA 417).
General information
Note !
In industry, the terms "Inverter", "Regulator" and "Drive" are sometimes interchanged. In this manual the term "Drive" will be used.
Before using the product, read the safety instruction section carefully (in the Quick Start Guide).
Keep the manual in a safe place and available to engineering and installation personnel during the product functioning
period.
WEG Automation Europe srl has the right to modify products, data and dimensions without notice.
The data can only be used for the product description and they can not be understood as legally stated properties.
Thank you for choosing this WEG product.
We would be glad to receive any possible information which could help us improve this manual. Our email address is:
techdoc@weg.net
All rights reserved.
ADL300 CiA® 417- Description of functions and parameter list
Page 2 of 46

Advertisement

Table of Contents
loading

Table of Contents