Table of Contents
Advertisement
13.
DESCRIPTION OF PARAMETERS
The LIFT menu displays the parameters for the LIFT function in configuration with CiA 417.
All of these functions are loaded on the ADL300 drive as "Application 2."
To enable this function, parameter 558 Application select must be set to 2 (see Introduction).
13.1 Legend
----------------------------------------------------------------------------------------------------------------------------------------------------------------
5 – LIFT
05.01 – SPEED
IFT
(0)
(1)
(2)
Menu
Par
Description
5.5.5
11240
Door feedback sel
Setting the source for Door Feedback input: "LISTA INPUT CIA 417". [*]
----------------------------------------------------------------------------------------------------------------------------------------------------------------
(0)
Menu and parameter indexing
(1)
Parameter ID
(2)
Parameter description
(3)
UM: Unit of measurement
Parameter type
BIT
Boolean, seen as 16 bits by modbus
ENUM
Selection list, seen as 16 bits by modbus
FLOAT
Real, seen as 32 bits by modbus
INT16
Integer with sign 16 bits, seen as 16 bits by modbus
(4)
INT32
Integer with sign 32 bits, seen as 32 bits by modbus
ILINK
Selection list, seen as 16 bits by modbus
LINK
Selection list, seen as 16 bits by modbus
UINT16
Integer without sign 16 bits, seen as 16 bits by modbus
UINT32
Integer without sign 32 bits, seen as 32 bits by modbus
(5)
Format of data exchanged on Fieldbus (16BIT, 32BIT)
(6)
Default value
(7)
Minimum value
(8)
Maximum value
Accessibility:
E
Expert
R
Read
(9)
S
Size
W
Write
Z
parameters changeable ONLY with drive disabled
Available in control mode:
V = Control V/f (open loop) / Synchronous MP
(10)
S = Vett Flow OL
F = Vett Flow CL (closed loop)
Selection lists:
[*]
Parameters in "Sorgente.../Sorg..." (Source) format are linked to a selection list.
On the specified list, you can select the origin (source) of the signal that will command the parameter. The lists are shown in Chapter C of this manual.
ADL300 CiA® 417- Description of functions and parameter list
(Menu level 1)
(Menu level 2)
(3)
UM
CALCF
Value calculated as number with floating decimal
CALCI
Value calculated as integer
SIZE
Value depending on drive size
(4)
(5)
(6)
Type
FB BIT
Def
ENUM
6000
(7)
(8)
(9)
Min
Max
Acc
RW
Page 22 of 46
(10)
Mod
FVS
Advertisement
Table of Contents
