WEG ADL300 User Manual page 33

05.05 – LIFT I/Os
The CiA 417 lift application commands and inputs can be connected to a signal via a selector that lets you choose from a
series of options on the selection list.
By means of the selection list, you can choose among the following for each command:
The CiA 417 application input signals can be connected by means of a selector that lets you choose from a series of
options on the selection list.
By means of the selection list, you can choose among the following for each input:
- Null or One
- Digital Inputs of I/O expansion
- Some internal signals (example: "Brake cont mon" ..)
A selectable bit of "LiftDecomp1" (example: "Lift decom1 B0")
-
- PAD15
They are connected to digital inputs in the I/O configuration.
In the CanOpen configuration, they are connected to LiftDecomp, which in turn is connected (for example, via the
Control word 1 variable) to a fieldbus process channel (example: PDC FieldBus M->S1).
In general, the Control word 1 variable can be connected to another fieldbus process channel or to the drive parameter
Wcomp or to PAD16.
The factory configuration is as follows:
Input
Enable
Battery - Mode
Input Contactor Feedback
Input Brake Feedback
Input Door Open
Input Door Feedback
Menu Par Description
5.5.1 11220 Enable cmd sel
Setting of enable command source:
"CIA 417 INPUT LIST"
1110 Digit input E
1210 Digit input 1x
1212 Digit input 2x
1214 Digit input 3x
1216
Digit input 4x
1218 Digit input 5x
1220 Digit input 6x
1222 Digit input 7x
1224
Digit input 8x
1226 Digit input 9x
1228 Digit input 10x
1230
Digit input 11x
1232 Digit input 12x
3702
Run cont mon
3706 Down cont mon
3708 Brake cont mon
ADL300 CiA® 417- Description of functions and parameter list
Description
Enable Command
Battery Mode Command
Contactor Feedback Input
Brake Feedback Input
Door Open Input
Door Feedback Input
UM Type
ENUM
Enable digital input
3X digital input
Run Cont Mon
Brake cont Mon
Door Open Mon
Null
FB BIT Def Min
1110
Default source
Max Acc Mod
RW FVS
Page 33 of 46