Table of Contents
Advertisement
LED Octostrip Set MKII
5.3. Net Mask
With this menu you can set the net mask number.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu. The display will show
03) Repeatedly press the SETUP button to skip to the desired section of the net mask (the currently
selected section will blink).
04) Press the UP/DOWN buttons to set the values.
05) Press the SETUP button to confirm.
5.4. Net
With this menu you can set the net number.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the net value. The adjustment range is between
04) Press the SETUP button to confirm.
5.5. Subnet
With this menu you can set the subnet number.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the subnet value. The adjustment range is between
04) Press the SETUP button to confirm.
5.6. Universe
With this menu you can set the universe number.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the universe value. The adjustment range is between
04) Press the SETUP button to confirm.
6. Sound-controlled
With this menu you can set sound-controlled mode.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to set the sound sensitivity. The adjustment range is between
03) Press the SETUP button to confirm.
04) The device will now react to the beat of the background music.
Ordercode: 42232
.
.
.
, from OFF to high sound sensitivity.
20
.
.
.
.
.
.
Advertisement
Table of Contents
