Table of Contents
Advertisement
Safety
Product
Mechanical
Information
Information
Installation
12.3
Optional external EMC filters
EMC filters can be sourced directly from Schaffner and Epcos. See
Table 12-33 for details.
It is essential that line rectors be connected between the filter
terminals and the power input terminals. Failure to observe
this requirement could result in destruction of the thyristors.
CAUTION
Table 12-33 Quantum MP and EMC filter cross reference
Schaffner armature
Model
QMP45A4(R)
FN3270H-80-35
QMP75A4(R)
QMP155A4(R)
FN3270H-200-99
QMP210A4(R)
QMP350A4(R)
QMP400A4(R)
QMP550A4(R)
QMP700A4(R)
* This filter is required if the input current to the Quantum MP will be
greater than 66Amps.
Figure 12-1 Maximum overload duration available
160
155
150
145
overload
(%)
140
135
130
125
120
115
110
105
100
NOTE
Overload of 150% for 30s is available with ambient temperature of 40° C up to a maximum of 10 repetitions per hour.
154
Electrical
Getting
Basic
Installation
Started
parameters
Schaffner armature
standard
high performance
FN3258-75-52
FN3258H-180-40
N/A
FN3359-800-99
overload duration (seconds)
Running the
SMARTCARD
Optimization
Motor
Operation
Manufacturers part number
Epcos
armature
high performance
B84143-A66-R105
*B84143-A90-R105
B84143BO250S080
N/A
12.3.1
Typical short-term overload limits
The maximum percentage overload limit changes depending on the
selected motor
Variations in motor rated current will result in changes in the maximum
possible overload as detailed in the Advanced User Guide.
Figure 12-1 can be used to determine the maximum overload duration
available for overloads between 100% and 150%. For example the
maximum overload available for a period of 60 seconds is 124%.
www.emersonct.com
Onboard
Advanced
Technical
Diagnostics
PLC
Parameters
Data
Schaffner standard
Epcos standard
field filter
FN3280H-8-29
W62400-T1262
FN3280H-8-29
Quantum MP User Guide
UL
Information
field filter
N/A
Issue: A3
Advertisement
Chapters
Table of Contents
