Safety
Product
Mechanical
Information
Information
Installation
3.8
Electrical terminals - Size 1
3.8.1
Location of the power and ground terminals
Figure 3-11 Location of the power and ground terminals
QMP45 / 75 drives
QMP75 / 155 drives
3.8.2
Terminal sizes and torque settings
To avoid a fire hazard and maintain validity of the UL listing,
adhere to the specified tightening torques for the power and
ground terminals. Refer to the following tables.
WARNING
3.8.3
Torque settings
Table 3-1 Control terminal data
Model
Connection type
All
Plug-in terminal block
Table 3-2 Auxiliary and Field terminal data
Model
Connection type
All
Terminal block
Quantum MP User Guide
Issue: A3
Electrical
Getting
Basic
Installation
Started
parameters
A1, A2
connection
5 mm
3/8 inch
5 mm
Auxiliary
connector
Torque setting
0.5 Nm 0.4 lb ft
Torque setting
0.5 Nm 0.4 lb ft
www.emersonct.com
Running the
SMARTCARD
Optimization
Motor
Operation
DB+,DB-,SR1, and SR2 connection
5 mm
3.5 mm
Field
connector
Relay
connector
Table 3-3 Drive power (L1, L2, L3, and GND) terminals
Model
QMP45A4(R)
QMP75A4(R)
QMP155A4(R)
QMP210A4(R)
Table 3-4 Drive power (A1 and A2) terminals
Model
QMP45A4(R)
QMP75A4(R)
QMP155A4(R)
QMP210A4(R)
Onboard
Advanced
Technical
PLC
Parameters
Data
5 mm
GND, L1, L2, L3
connection
QMP45 / 75
drives
5 mm
QMP155 / 210
drives
5/16 inch
Control and
encoder
connection
2.5 mm
Tach
connection
3.5 mm
MP 10, 120 Vac
I/O connection
3.5 mm
Connection type
2-14 AWG Slot Screw Lug
4-5.6 Nm 2.9-4.2 lb ft
2-14 AWG Slot Screw Lug
4-5.6 Nm 2.9-4.2 lb ft
5/16" Socket Lug
5/16" Socket Lug
Connection type
2-14 AWG Slot Screw Lug
4-5.6 Nm 2.9-4.2 lb ft
2-14 AWG Slot Screw Lug
4-5.6 Nm 2.9-4.2 lb ft
3/8" Socket Lug
3/8" Socket Lug
UL
Diagnostics
Information
Torque setting
31 Nm 23 lb ft
31 Nm 23 lb ft
Torque setting
42 Nm 31 lb ft
42 Nm 31 lb ft
23