Activating The Atmos Variotherm; Performing Thermal Nystagmus Stimulation; Setting The Time (1-99 S); Setting The Temperature - Atmos S 61 Servant Operating Instructions Manual

4.0 Operation

4.4.3 Activating the ATMOS Variotherm

Remove the handle from the support. The ATMOS
Variotherm is automatically activated via the installed light
barrier. The adjustment control of the ATMOS Variotherm
requires approx. 20 sec. until the desired temperature is
reached. Check the temperature indication! As long as the
temperature of the actual value deviates from the target
value, the LED of the "Temperature" button flashes. When
the target and actual value correspond, the LED lights up
permanently. Now you may begin with the irrigation of the
auditory canal.
The last active temperature level is selected.

4.4.4 Performing thermal nystagmus stimulation

Warning: May only be used with the ear irrigation bowl.
The hose attachment must be exchanged after each patient.
!
Remove the handle  select temperature and adjust if necessary  if required, set time  press  (flashing approx. 10 sec.)
 when the ATMOS Variotherm is ready for use, a beep can be heard  hold nozzle in working position and activate trigger 
perform nystagmus stimulation  after the time expires, a beep sounds again.
4.4.5 Setting the time (1–99 s)
Remove the handle.
Press and hold and set the desired stimulation time using
8
When selecting the respective temperature, the setting used the
previous time will be adopted automatically.
Now and again check the time setting of the timer.

4.4.6 Setting the temperature

You can apply the ATMOS Variotherm at temperatures from
20 °C to 47 °C. The minimum temperature is defined by the
temperature of the tap water.
Setting at 37 °C:
Press 5 to select this temperature.
Warm stimulation (38–47 °C):
Remove the handle.
Keep 6 pressed. Set the desired temperature using
Release .
6
When selecting the button
will be adopted automatically.
Cold stimulation (20–36 °C):
Remove the handle.
Keep pressed. Set the desired temperature using
7
Release .
7
When selecting the button
will be adopted automatically.
Heating off:
Press the active temperature level on the button "Temperature" to
switch the heating on and off.
22
2
6 , the previous temperature setting
2
7 , the previous temperature setting
.
2
.
.
Ear irrigation bowl
Handle thermal
nystagmus
stimulation
On/off switch
nystagmus binoculars
Connection
nystagmus binoculars
2
8
2
8 7 6 5