Table of Contents
Advertisement
❸
<Number of stitches to turn OFF the changeover function
when the one-touch changeover function is enabled>
End of a multi-
layered section
of material
3) Enter the number of stitches with numeric key-
Factory-set value at the time of delivery
Setting range : 0 to 200
* If this value is set to 0 (zero), the multi-layered
❹
After the sewing
machine has
finished sewing
of a multi-
layered section
of material,
the machine's
reaction is also
delayed by a
several number
of stitches.
– 107 –
pad ❸ .
❹ to confirm the setting.
Press
: 0 (Number of stitches is not set)
section changeover OFF function by the num-
ber of stitches will be disabled.
After the end of multi-layered section of
material is fed, the multi-layered sec-
tion detection function detects the flat
section of material to return the sewing
conditions to those for the flat section.
However, this reaction sometimes delays
according to the sewing conditions.
If such a delay occurs, it can be correct-
ed by setting the number of stitches of
the multi-layered section detection.
Advertisement
Table of Contents
