Nfc - JUKI PLC-2710V Instruction Manual

9-9-3. NFC

The operation panel supports NFC (Near Field Communication).
Sewing data, maintenance information or the like can be viewed, edited, copied, etc., on an Android terminal
(such as tablet and smartphone) on which JUKI application for Android "JUKI Smart App" has been installed,
by means of the NFC communication function.
Refer to the Instruction Manual for JUKI Smart App for details of JUKI application for Android "JUKI Smart
App".
① Position of the NFC antenna
❶
② Precautions to be taken when handling NFC
• The position of the NFC antenna varies according to the tablet/smartphone used.
Be sure to read the instruction manual of your device before using the NFC communication function.
• To use the NFC communication function, place the NFC communication function setting in "Enable" while refer-
ring to the instruction manual for your tablet/smartphone.
<Fig.1>
<Fig.2>
[Position of the NFC antenna]
To conduct the NFC (near field communication)
between the sewing machine and the tablet or
smartphone, bring the tablet or smartphone to
NFC mark ❶ on the operation panel as illus-
trated in Fig. 2, and hold it there until the data
is displayed.
* If the NFC communication has failed, error
message will be displayed on the tablet/
smartphone screen.
When the error message is displayed on the
screen, carry out the NFC communication
again.
– 144 –