Table of Contents
Advertisement
4-7. Thread trimming and condensation stitching function
Thread length remaining on the material after thread trimming is shortened by performing condensation
stitching before thread trimming.
Due to computerization of the feed mechanism, the machine generates noise that is specific to the
stepping motor when it runs at a low speed. This noise is not a sign of fault.
❶
❷
❹
❸
– 30 –
[How to set the condensation stitch]
1)
Display the sewing data edit screen by
❶ .
pressing
2)
Display "S055 Shorter thread remaining" by
❷ .
pressing
3)
ON / OFF (with or without condensation
stitching) of condensation stitching before
thread trimming is set.
4)
Confirm your entry by pressing
5)
Display the sewing screen by pressing
❹ .
❸ .
Advertisement
Table of Contents
