Care; Standby Mode - JUKI PLC-2710V Instruction Manual

Table of Contents

7. CARE

Perform the maintenance below every day for longer use of your machine.

The maintenance mode should be used for maintenance of the sewing machine.

Under the standby mode, the sewing machine does not start running even if the pedal is depressed.

Under this mode, the jog dial is also disabled. It is therefore necessary to turn the handwheel by hand

if the needle bar position has to be adjusted.

1) When standby switch ❶ is pressed on the

sewing machine start screen, the sewing ma-

chine enters the standby mode.

❶

2) Under the standby mode, the message is dis-

played and the standby switch lights up.

3) When standby switch ❶ is pressed under the

standby mode, the screen returns to the previ-

ous screen.

– 92 –

Be sure to check that the screen has

changed to the maintenance mode

screen so as to prevent accidents

caused by abrupt start of the sewing ma-

chine.

Table of Contents