JUKI PLC-2710V Instruction Manual page 108

<Sewing data edit screen>
<Multi-layered section changeover function ON
sensor value screen>
3) Place the normal section of material under the presser foot, and press ❾ .
Lift the presser foot by depressing the back part of pedal.
❾
<Multi-layered section changeover function ON
sensor value teaching screen>
❻ ❼
❽
2. Set a "threshold" for the multi-layered sec-
tion detection.
1) Press
"Multi-layered section changeover function ON
sensor value screen" is displayed.
(For the "threshold" for turning OFF the
multi-layered section changeover function,
press
same manner as described below.)
❽ .
2) Press
"Multi-layered section changeover function ON
sensor value teaching screen" is displayed.
– 104 –
❻ .
❼ and set the threshold in the