Table of Contents
Advertisement
(2) How to set (polygonal-shape stitching)
① Turning ON the teaching function
<Number of stitches input screen>
② Start teaching, and confirm data on a step-by-step basis
The input value is set to 0 (zero). Depress the pedal to start sewing. Count the number of stitches until
the sewing machine stops.
❺
❷
❸
❹
❷ to turn ON the teaching function.
Press
❹ to confirm the teaching data on the
Press
current step. Press
rent screen to the number of stitches input screen
for the next step.
If no further step to be registered is present, this
operation will be disabled.
Perform sewing until the end of step is reached
(the last stitch is sewn). Then, perform thread
trimming to confirm the teaching content.
– 68 –
❺ to change the cur-
Advertisement
Table of Contents
