Table of Contents
Advertisement
TRANSFER TABLE ASSEMBLY INSTALLATION - 2084
1. Install the transfer table for the 2084. Insert the
table between the folder side frames (Fig. 13) and
set the notches on to the locating pins (Fig. 9a).
Fig. 13
2. Align the outfeed of the burster with the transfer
table and push the burster forward until the mounting
holes of the transfer table and the burster line up.
Slide mounting pins into holes to lock the table in
place (Fig. 14).
Fig. 14
Locating mounting pins
3. Plug burster power cable & interlock cable into
folder (Fig. 15). Remove lower fold plate to access
the receptacles.
Fig. 15
Power cord
4. Place ball deck onto the burster transfer table (Fig.
16).
Fig. 16
8
Interlock cord
Advertisement
Table of Contents
