Fine Adjustments For Table 1 - Formax FD 332 Operator's Manual

Note:
The maximum weight of paper that can be used for
cross folding is 28#.
This requirement, however, varies according to the
following conditions:
Paper type; Paper size;
Whether grains run lengthways or sideways;
Temperature and relative humidity;
Printing condition.
The folding position may be displaced to a greater
extent than when the paper is folded using a
regular fold method, or a corner of the folded
paper may be folded inside as indicated in the
figure. These, however, do not mean that the
machine has broken down.
Note:
Press the crease hard using the hand. Do not
stack too many sheets of paper on the paper feed
table.

Fine Adjustments for Table 1

Fold type
Single
Table 1 is not used
fold
Gate
fold
Direction to turn the Table 1
Plane (A)
fine adjustment knob
Long
Short
15