Speed; Fold Plates - Formax AutoSeal FD 2094 Operator's Manual

SPEED

The speed of the machine can be changed by pressing
the SPEED button while the main drive motor is running or
stopped.
Use the "+" and "-" buttons, to adjust the speed. The "+"
button will increase the speed gradually, as long as the
button is pressed.
Once the folder reaches its maximum speed a message will
be displayed until the ENTER button is pressed.
The "-" button will decrease the speed gradually, as long as
the button is pressed.
Once the folder reaches its minimum speed a message will
be displayed until the ENTER button is pressed.
Full speed range travel of the motor takes 10 seconds.
Press the ENTER button to return to normal operation.

FOLD PLATES

The fold plates can be set at any time from the operating
mode by pressing the PLATE button that corresponds to the
fold plate which needs to be adjusted.
1. To adjust the number 2 fold plate, press the PLATE 2
button.
2. Use the "+" and "-" buttons to move the stop into position.
Once either button is pressed the display will change to
display the actual location of the plate stop.
Pressing the "+" button once will increment the plate stop
0.25 mm. Holding it for more than 2 seconds will increment
the plate stop continuously at slow speed. Holding the "+"
button for more than 5 seconds will increment the plate stop
continuously at high speed until you release the button or
the plate stop hits the home position switch.
Pressing the "-" button once will decrement the plate stop
position 0.25 mm. Holding it for more than 2 seconds will
decrement the plate stop position at slow speed. Holding the
"-" button for more than 5 seconds will decrement the plate
stop position at high speed until you release the button, or
the plate stop hits the deflect position switch.
3. Press the ENTER button to return to normal operation.
21