ABB SACE Tmax XT7 Operation And Maintenance Manual page 34

Measurements
32 | © 2020 ABB | 1SDH001821A1002 - ECN000135670
Figure 18
If provided for by Trip unit model, the Measurements pages contain a list of measurements acquired in real
time, expressed in absolute value:
Page Name
1 Current
2 Voltage
3 Active power
4 Reactive power
5 Apparent power
6 Energy counters
7 Ekip Signalling 3T
Ekip Touch configuration involves certain exceptions:
• the Ne current measurements are available with 4P and 3P + N configurations
• the phase voltage measurements are available with the 4P and 3P + active external neutral voltage
configuration
• with the 3P configuration, pages: Active Power, Reactive Power and Apparent Power are replaced by the
Powers page with the total active, reactive and apparent power measurements
• Ige/Rc current available with external toroid activated
Press the sides of the display to browse the pages; press the HOME key to quit.
NOTE: each page can be set as the main page by pressing HOME, holding it for five
seconds and confirming the message on the display
Measurements
Currents: phase, earth fault, external/Rc earth fault
Voltages: line-to-line, phase, neutral
Phase and total active powers
Phase and total reactive powers
Phase and total apparent powers
Total active, reactive and apparent energies
Summary of Ekip Signalling 3T module measurements, if present
Ekip Touch - Interface and menus | 3 - Graphic pages
ABB | SACE Tmax XT