ABB SACE Tmax XT7 Operation And Maintenance Manual page 117

Power factor The power factor is the real time measurement of the ratio between total active power and total apparent
Energy counters The energy counters are the measurements of the total reactive and apparent active energy, updated every
115 | © 2020 ABB | 1SDH001821A1002 - ECN000135670
power, expressed as cos φ.
Measurement Monitor time
Power factor 0,5 ÷ 1
(1)
accuracy based on Ekip Touch and Ekip Touch Measuring without Class 1 Power & Energy Metering
package; if the Class 1 Power & Energy Metering package is present and for all other Trip unit models, check
the indicated performance values from page 116
minute.
Measurement
Total active, reactive and
apparent energy
(1)
accuracy based on Ekip Touch and Ekip Touch Measuring without Class 1 Power & Energy Metering
package; if the Class 1 Power & Energy Metering package is present and for all other Trip unit models, check
the indicated performance values from page 116
Reset measurements
The Energy RESET command is available in the Energy menu for the purpose of resetting the energy counters
(page 36).
Accuracy
2,5%
(1)
Monitor time
1 kWh ÷ 2 TWh; 1 kVARh ÷ 2 TVARh; 1 kVAh ÷ 2 TVAh
Ekip Touch - Measurements | 2 - Ekip Measuring Measurements
ABB | SACE Tmax XT
Notes
"_ _ _" (not available) is indicated for:
active and/or reactive power not available
or outside the admissible ranges
Accuracy
2 %
(1)