Page 1
User Manual ARK-2150 Fanless Embedded Box PC...
Page 2
English user manual included as a PDF file on the CD. Please disregard the Chinese hard copy user manual if the product is not to be sold and/or installed in China. ARK-2150 User Manual...
Page 3
The documentation and the software included with this product are copyrighted 2010 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
Power cable 2-pin 180 cm, USA for ARK-338X 1700001948 Power cable 2-pin 180 cm, Europe for ARK-338X 1700001949 Power cable 2-pin 180 cm, UK for ARK-338X 1700009001 2-Pole Phoenix to DC-Jack Power cable 9666K10000E DIN-rail mounting kit 1960025333N011 VESA mounting kit ARK-2150 User Manual...
RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted Access Area. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advan- tech disclaims all responsibility for the accuracy of any statements contained herein. ARK-2150 User Manual...
ARK-2150, an intelligent, fanless embedded system powered by Intel Celeron 1047UE/ Core i3 3217UE/ i7 3517UE Dual Core high performance processor with multiple I/O interface. ARK-2150 is the first one high performance product in ARK- 2000 series. The new generation Intel Core i processor brings 15% improvement on processing power and 60% on 3D graphics performance than previous generation Intel Core i processors.
Expansion Interface: Supports 2 x full-size Mini-PCIe (one supports mSATA and the other with SIM holder) and 1 x half-size Mini-PCIe Software API: Advantech iManager and SUSIAccess - Remote Device Man- agement technology 1.2.2 Display Controller: Intel HD Graphics 4000 ...
Supported Sequence control 8-bit programmable DIO Multi Level WDT (set by Advantech iManager) Watchdog timer Programmable 1-255 sec / min CPU Temperature / input Current / input Voltage Hardware monitor Deep sleep S5 mode / Smart Fan / Back light control...
Mechanical Specifications 1.4.1 Dimensions 264.5[10.41] x 133.0[5.24] x 75.1[2.96] (Unit: mm [Inch]) Detail A 238,2 75.05 Detail A 252,5 264,5 Figure 1.1 ARK-2150 Mechanical dimension drawing 1.4.2 Weight 2.8kg (6.17lb) Power Requirement 1.5.1 System Power Minimum power input: –...
2.2.1 Jumper Description You may configure ARK-2150 to match the needs of your application by setting jump- ers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
Table 2.1: Jumper List of Main Board Clear CMOS Auto Power On Setting DDR3L select 2.2.3 Jumper Location Figure 2.1 Jumper layout 2.2.4 Jumper Setting At Mother Board 2.2.4.1 Clear CMOS (J1) Table 2.2: Clear CMOS (JP1) Setting Function (1-2)* Normal (default) ARK-2150 User Manual...
Setting Function Power Button for Power On (1-2)* Auto Power On (default) 2.2.4.3 LVDS Panel Power Select (J4) Table 2.4: LVDS Panel Power Select (J4) Setting Function (Open)* 1.5V for Std. DDR3 (default) Close 1.35V for DDR3L ARK-2150 User Manual...
2.3.1.2 Ethernet Connector (LAN) ARK-2150 is equipped with up to four Ethernet controllers that are fully compliant with IEEE 802.3u 10/100/1000 Mbps CSMA/CD standards. The Ethernet port pro- vides a standard RJ-45 jack connector with LED indicators on the front side to show its Active/Link status (Green LED) and Speed status (Yellow LED).
MDI3+ MDI3- 2.3.1.3 Audio Connector ARK-2150 offers stereo audio ports by three phone jack connectors of Line_Out, Line_In, Mic_In. The audio chip is controlled by ALC892, and it’s compliant with Aza- lea standard. Figure 2.6 Audio connector Table 2.7: Audio Connector Pin Assignments...
Please refer to Table. 2.7 for its pin assignments. USB 3.0 connectors contain legacy pins to interface to USB 2.0 devices, and a new set of pins for USB 3.0 connectivity (both sets reside in the same connector). Figure 2.9 USB3.0 Connector ARK-2150 User Manual...
USB_data- USB_data+ 2.3.1.7 VGA Connector The ARK-2150 provides a high resolution VGA interface connected by a D-sub 15- pin connector to support a VGA CRT monitor. It supports display resolutions of up to 1900 x 1200. Figure 2.11 VGA Connector Table 2.12: VGA Connector Pin Assignments...
ARK-2150L comes with a lockable DC Jack that carries 12 VDC external power input and ARK-2150F comes with a two pins header that carries 12 ~ 24 VDC external power input. ARK-2150L Figure 2.13 Power Input Connector (ARK-2150L) Figure 2.14 Compatible dimension of DC Plug for ARK-2150L ARK-2150 User Manual...
Figure 2.16 Power Button 2.3.1.11 LED Indicators There are two LEDs on ARK-2150 front metal face plate for indicating system status: PWR LED is for power status; and HDD LED is for HDD & Cfast flash disk status. Figure 2.17 LED Indicators 2.3.1.12...
TMDS data 5- TMDS data 5+ TMDS clock shield TMDS clock+ TMDS clock- Installation 2.4.1 HDD Installation Unscrew the six screws on the bottom cover. Slide the 2.5" SATA HDD into the HDD bay on the bottom cover. ARK-2150 User Manual...
Screw the four screws on the side of HDD bracket. The screws are used to fix the HDD on the bracket. (The screws are in the accessory box.) Recover the bottom cover and screws. 2.4.2 Memory Installation Unscrew the four screws on the top cover. ARK-2150 User Manual...
Page 34
Unscrew the four screws on the right and left side of top cover Remove the top cover Install DDR3 memory in to the system Recover the top chassis. ARK-2150 User Manual...
2.4.3 MiniPCIe module and mSATA Installation Unscrew the four screws on the top cover. Install ARK-2150L miniPCIe module or mSATA into the socket. mSATA or full-size miniPCIe full-size miniPCIe ARK-2150L half-size miniPCIe ARK-2150 User Manual...
Page 36
Install ARK-2150F miniPCIe module or mSATA into the socket. mSATA or full size miniPCIe Full size miniPCIe with SIM ARK-2150F Half size miniPCIe Recover the bottom cover and screws. ARK-2150 User Manual...
AMIBIOS has been integrated into many motherboards for over a decade. With the AMIBIOS Setup program, users can modify BIOS settings and control various sys- tem features. This chapter describes the basic navigation of the ARK-2150 BIOS setup screens. Figure 3.1 Setup program initial screen AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
MM/DD/YY format. The time must be entered in HH:MM:SS format. Advanced BIOS Features Setup Select the Advanced tab from the ARK-2150 setup screen to enter the Advanced BIOS Setup screen. Users can select any item in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item.
Figure 3.3 Advanced BIOS features setup screen 3.3.1 ACPI Settings Figure 3.4 ACPI Setting Enable ACPI Auto Configuration This item allows users to enable or disable BIOS ACPI auto configuration. ARK-2150 User Manual...
This item allows users to enable or disable the No-Execution page protection tech- nology. Intel Virtualization Technology This item allows users to enable or disable the intel virtualization technology. Hardware Prefetcher This item allows users to enable or disable the hardware prefetcher feature. ARK-2150 User Manual...
This item allows users to enable or disable the adjacent cache line prefetch feature. 3.3.3 SATA Configuration Figure 3.6 SATA Configuration SATA Controller(s) This item allows users to enable or disable the SATA controller(s). SATA Mode Selection This item allows users to select mode of SATA controller(s). ARK-2150 User Manual...
Figure 3.7 PCH-FW Configuration MDES BIOS Status Code This item allows users to enable or disable MDES BIOS Status Code function. Firmware Update Configuration This item allows users to enable or disable ME FW image re-flash function. ARK-2150 User Manual...
This item allows users to enable or disable Alert Specification Format. Activate Remote Assistance Process This item allows users to enable or disable trigger CIRA boot. USB Configure This item allows users to enable or disable USB configure function. ARK-2150 User Manual...
This is a workaround for the OS without XHCI hand-off support. The XHCI ownership change should claim by XHCI driver. EHCI Hand-Off This is a workaround for the OS without EHCI hand-off support. The EHCI ownership change should claim by EHCI driver. ARK-2150 User Manual...
Hub descriptor. 2.0 Flash Disk 5.00 This is a Mass storage device emulation type. 3.3.7 SMART Settings Figure 3.10 SMART Settings SMART Self Test This item allows users to enable or disable SMART Self Test. ARK-2150 User Manual...
Change Settings This item allows users to select super I/O device. 3.3.8.2 Serial Port 2 Configuration Serial Port This item allows users to enable or disable COM2. Change Settings This item allows users to select super I/O device. ARK-2150 User Manual...
This item allows users to enable or disable COM4. Change Settings This item allows users to select super I/O device. Device Mode This item allows users to select Serial Port mode. Serial interface This item allows users to select RS-232/422/485. Default by RS-232. ARK-2150 User Manual...
This item allows users to set backlight Function. Power Saving Mode This item allows users to select ITE8518 power saving mode. H/W Monitor This item is show CPU temperature and VBAT / +5V / +12V / +Vcore voltage informa- tion. ARK-2150 User Manual...
Figure 3.15 Serial Port Console Redirection Console Redirection This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Serivces (EMS). Console Redirection This item allows users to configuration console redirection detail settings. ARK-2150 User Manual...
Configurable TDP This item allows users to select TDP levels. Config TDP LOCK This item allows users to enable or disable Config TDP LOCK. ACPI T State This item allows users to enable or disable ACPI T State. ARK-2150 User Manual...
Chipset Select the Chipset tab from the ARK-2150 setup screen to enter the Chipset BIOS Setup screen. You can display a Chipset BIOS Setup option by highlight¬ing it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in this sec- tion.
Please notice that no all the WiFi card can support this function. High Precision Timer Enables or disables the high precision timer. SLP_S4 Assertion Width This item allows users to set a delay of sorts. Restore AC Power Loss ARK-2150 User Manual...
This item allows users to select off, on and last state. 3.4.2 System Agent (SA) Configuration Figure 3.19 System Agent (SA) Configuration 3.4.2.1 Intel IGFX Configuration Figure 3.20 Intel IGFX Configuration ARK-2150 User Manual...
Select boot display device at post stage. LCD Panel Type This item allows users to select panel resolution. Panel Scaling This item allows users to enable or disable panel scaling. Active LFP This item allows users to select LFP configuration. ARK-2150 User Manual...
If this option is set to Disabled, the BIOS displays normal POST messages. If Enabled, an OEM Logo is shown instead of POST messages. Option ROM Message Set display mode for option ROM. INT19 Trap Response This item allows option ROMs to trap interrupt 19. ARK-2150 User Manual...
Security Setup Figure 3.23 Password Configuration Select Security Setup from the ARK-2150 Setup main BIOS setup menu. All Security Setup options, such as password protection is described in this section. To access the sub menu for the following items, select the item and press <Enter>: Change Administrator / User Password: Select this option and press <ENTER>...
Restore Defaults The ARK-2150 automatically configures all setup items to optimal settings when users select this option. Optimal Defaults are designed for maximum system perfor- mance, but may not work best for all computer applications. In particular, do not use...
Page 60
Save User Defaults When users have completed system configuration, select this option to save changes as user defaults without exit BIOS setup menu. Restore User Defaults The users can select this option to restore user defaults. ARK-2150 User Manual...
Need help?
Do you have a question about the ARK-2150 and is the answer not in the manual?
Questions and answers