2.19 EXTENDED USB BOARD TYPE M19 (D3BS-01)
2.19.1 ACCESSORIES
No.
1
Extended USB board
2.19.2 INSTALLATION PROCEDURE
•
To prevent injury from electrical shock or damage to the machine, before installation
always, turn the main machine power off, and then unplug the machine power supply
cord from the power source.
•
To prevent damage to the circuits on the boards, always touch a metal surface to
discharge static charge from your body before you handle a board.
Never put your hand or a tool into the slot when you install an option.
•
1.
Loosen the two screws and remove the slot cover. The removed cover will not be reused.
SM
Extended USB Board Type M19 (D3BS-01)
Description
2-101
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Q'ty
1