Commissioning; Function Check; Switching On The Measuring Device - Endress+Hauser Proline Prosonic Flow B 200 Brief Operating Instructions

Proline Prosonic Flow B 200
8.3.2 Via service interface (CDI)
3
1 Service interface (CDI = Endress+Hauser Common Data Interface) of the measuring device
2 Commubox FXA291
3 Computer with "FieldCare" operating tool with COM DTM "CDI Communication FXA291"
9

Commissioning

9.1

Function check

Before commissioning the device, make sure that the post-installation and post-connection
checks have been performed.
• "Post-mounting check" checklist (→  18)
• "Post-connection check" checklist (→  25)
9.2

Switching on the measuring device

After a successful function check, switch on the measuring device.
After a successful startup, the local display switches automatically from the startup display to
the operational display.
If nothing appears on the local display or a diagnostic message is displayed, refer to the
device' s operating instructions which can be found on the CD-ROM supplied with the
device.
Endress+Hauser
2 1
Commissioning
A0014019
35