Transporting The Product - Endress+Hauser Proline Prosonic Flow B 200 Brief Operating Instructions

Proline Prosonic Flow B 200
5.2

Transporting the product

WARNING
L
Center of gravity of the measuring device is higher than the suspension points of the
webbing slings.
Risk of injury if the measuring device slips.
‣
Secure the measuring device from rotating or slipping.
‣
Observe the weight specified on the packaging (stick-on label).
‣
Observe the transport instructions on the stick-on label on the electronics compartment
cover.
Observe the following notes during transport:
• Transport the measuring device to the measuring point in the original packaging.
• Do not remove protective covers or protective caps installed on process connections. They
prevent mechanical damage to the sealing surfaces and fouling in the measuring tube.
Endress+Hauser
Storage and transport
A0015606
A0015604
11