Table of Contents
Advertisement
3. Disconnect the power cord from the electrical outlet and the projector.
Warning Indicator
When the warning indicators (see below) come on, the projector will automatically shutdown:
•
LIGHT LED indicator is lit red and if POWER/STANDBY indicator flashes amber.
•
TEMP LED indicator is lit red, this indicates the projector has overheated. Under normal
conditions, the projector can be switched back on.
•
TEMP LED indicator flashes red and if POWER/STANDBY indicator flashes amber.
Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning
indicator light up again, contact your service center for assistance.
Adjusting the projected image
Adjusting the projector's height
The projector is equipped with elevator feet for adjusting the image height.
1. Locate the adjustable foot you want to modify on the underside of the projector.
2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it.
3. Repeat with the remaining feet as needed.
Adjusting the projector's focus
1.
T
o focus the image, slide the focus switch to left/right until the image is clear.
DHD410S User Manual
020-001438-01 Rev. 1 (06-2018)
Tilt-Adjustment Feet
Tilt-Adjustment Ring
Installation
16
Advertisement
Table of Contents
