Surge Protective Device (Spd); General; Safety; Scope Of Supply - Fronius xPrimo GEN24 4.0 Plus Operating Instructions Manual

Table of Contents

Advertisement

Surge protective device (SPD)

General

A surge protective device (SPD) protects against temporary overvoltages and dis-
sipates surge currents (e.g. lightning strike). Building on an overall lightning pro-
tection concept, the SPD helps to protect your PV system components.
For detailed information on the wiring diagram of the surge protective device, see
chapter
If the surge protective device is triggered, the colour of the indicator changes
from green to red (mechanical display) and the operation LED of the inverter
lights up red (see chapter
36). The error code
inverter in the
ations"
by an authorised specialist.
IMPORTANT!
The inverter also switches off if the 2-pin signal cable of the surge protective
device is interrupted or damaged.
External surge protective device
To receive notification when external surge protective devices are triggered, it is
recommended to connect the feedback contacts in series to the WSD input.

Safety

Danger due to electrical voltage on live parts of the photovoltaic system.
This can result in serious injury and damage to property.
Danger due to work that has been carried out incorrectly.
This can result in serious injury and damage to property.

Scope of supply

The surge protective device (SPD) is an optional extra and can be retrofitted to
the inverter.
For technical data, see chapter
Wiring diagram - surge protective device SPD
Button functions and LED status indicator
"1030 WSD Open"
"System"
"Event Log"
as well as in Fronius Solar.web. In this case, the inverter must be repaired
WARNING!
Disconnect live parts of the photovoltaic system on all pins and on all sides.
Secure against re-activation in accordance with national regulations.
Allow the capacitors of the inverter to discharge (2 minutes).
Check that the inverter is de-energised with a suitable measuring device.
WARNING!
Installing and connecting a surge protective device (SPD) must only be car-
ried out by service personnel trained by Fronius and only within the scope of
the respective technical regulations.
Follow the safety rules.
is displayed on the user interface of the
menu or in the user menu under
"Technical
data" on page 167.
on page 206.
on page
"Notific-
141

Advertisement

Table of Contents
loading

Table of Contents